
Read the complete resource
Fruit quality, including size, colour, biochemical and mineral composition, pest and disease damage, russeting, sunburn, watercore, mechanical damage and other factors, is formed in the orchard.
It is therefore important to ensure high fruit quality in the orchard, with 90–95% of fruit in extra and class I grades, by managing processes in the plant and its organs through a combination of environmental, biological and agronomic factors and plant bioregulators. During subsequent delivery stages (storage, packing and transport), the main task is to preserve as much as possible of the initial quality achieved in the orchard.
Optimum harvest timing
One of the most important factors determining apple quality and storage duration is maturity at harvest.
Early-picked fruit has insufficient antioxidants and an unbalanced mineral composition (K, Mg, Ca, P, N), so it does not reach the size, colour, biochemical composition and flavour characteristic of its variety. During storage, such fruit cannot acquire its variety’s flavour and is susceptible to superficial scald, bitter pit, lenticel spotting, tissue browning and shrivelling.
With late harvesting, metabolic disturbances occur in fruit, leading to core browning, watercore damage, bitter pit, cracking, fungal disease susceptibility and a greater likelihood of fruit drop. During storage, such fruit loses consumer qualities faster, namely firmness and juiciness, has low acidity and undergoes senescent and low-temperature breakdown.
Only harvesting at the optimum time allows fruit to attain its variety’s characteristic size, colour, flavour, aroma and nutritional value. Its biochemical and mineral composition and maturity then ensure high quality in storage and delivery to consumers. The optimum harvest window depends on varietal genotype and environmental and agronomic cultivation factors.
Correct harvest timing requires monitoring fruit physiology and quality. Worldwide, the following indicators and indices are used:
- number of days from full bloom to harvest;
- Thiault index (sugar-to-acid ratio);
- Streif index (firmness relative to starch and soluble solids content);
- Perlium index (based on firmness, soluble solids and sugars);
- AD index (based on chlorophyll content);
- fruit antioxidant activity.
Indicators determining potential keeping quality in the orchard are also used (Table 1).
Table 1. Indicators determining fruit keeping potential in the orchard
Name |
Value |
|
Endogenous ethylene content |
0,1–0,5 ppm |
|
Iodine–starch index at harvest (5–8 points) |
2,5–4 |
|
Firmness at harvest (kg, d=12 mm) |
6.5%–10.0 kg/cm2 |
|
Dry matter content |
>12% |
|
Mineral element content (mg/100 g fresh weight) |
Ca2++>5;P>9;Mg2++<10; K = 90–120 |
|
Element ratios |
(K + Mg2++) / Ca2++ < 25; N / Ca2++ < 10; Ca2++ / Mg2++ ≥ 0,5 |
These indicators and orchard factors such as yield, shoot growth intensity, plantation age, soil and weather characteristics, amount and distribution of rainfall during the growing season, and fruit with fungal diseases, watercore or bitter pit determine keeping quality in the orchard.
Combined use of these indicators allows the crop to be divided into long-, medium- and short-term storage batches and the best technology and storage period to be chosen for each.
Fruit drop
Untimely harvesting causes fruit drop, which in some years can reach 20% or more depending on the pomological variety: at a yield of 30 t/ha, drop may be 6 t/ha or more. Producers suffer enormous losses because the price of this fruit falls by an average of 10–12 roubles/kg, meaning losses per 1 ha of orchard can reach 60–80 thousand roubles.
Fruit and leaf drop is caused by hormonal imbalance in the plant and fruit and is associated with formation of abscission tissue in the stalk and petiole. Ethylene induces drop, while auxin suppresses ethylene’s physiological action. When auxin supply to the stalk decreases and ethylene increases, separation from the parent plant begins through activation of cellulase and pectinase enzymes, which destroy cells in the abscission layer.
Fruit and leaf drop is therefore primarily linked to a shift in the auxin–ethylene balance towards ethylene. Many factors contribute, including insufficient assimilates, cytokinins and calcium. Currently, the most effective way to reduce fruit drop is treating trees with auxin-containing products (Obstormon, Obstaktin) two to three weeks before harvest begins. The main factors increasing or limiting drop are shown in Table 2.
Table 2. Factors increasing and limiting fruit drop
Factors increasing fruit drop (for Orlik, McIntosh and other varieties) |
Factors limiting fruit drop (for Golden Delicious and Severny Sinap) |
|
Reduced auxin supply and increased ethylene in the stalk abscission layer |
Auxin supply to the stalk abscission layer; inhibition of ethylene biosynthesis |
|
Reduced leaf and fruit growth activity |
Use of dwarfing clonal rootstocks |
|
Insufficient light and assimilates |
Good canopy illumination; high leaf photosynthetic activity and adequate assimilate supply to leaves and fruit |
|
Stress factors (drought, high temperatures, waterlogging, strong wind and others) |
Increased plant resistance to stress factors |
|
Damage by diseases, pests or hail; insufficient seeds |
Optimisation of water and mineral regimes |
|
Vigorous shoot growth |
Moderate shoot growth (branch bending, growth regulators); skilled tree pruning |
|
High crop load |
Normal crop load |
|
Low calcium content in fruit |
Fruit with high calcium content |
|
Fewer than 5 seeds |
At least 5 seeds |
|
Treatment with ethylene-releasing products (ethephon, hydrel and others); excessive pesticide load on plants |
Preharvest treatment with products containing auxins or inhibiting ethylene biosynthesis |
Fruit harvesting and transport
Harvest and transport cause the main mechanical fruit damage: pressure marks, bruises, punctures and missing stalks. An intact stalk is standard for extra-grade fruit. Such damage significantly reduces fruit grade and quality.
Ways to minimise mechanical damage and improve fruit quality include:
- assessing pickers’ work by the proportion of extra- and class I-grade fruit in the batch;
- using special platforms, harvesters and picking bags;
- harvesting fruit in stages;
- presorting fruit when placing it in containers;
- container quality;
- vehicle and road quality.
Forming uniform storage batches
Initial fruit quality, including biochemical and mineral composition, anatomical and morphological structure and physiological condition, plays a crucial role in resistance to physiological and fungal diseases during storage.
Within one enterprise, initial quality and keeping ability can differ for fruit of the same variety. They depend on rootstock types, soil, plantation age, shoot vigour, crop load, agronomic factors and harvest timing.
The indicators mentioned above are used together to form uniform batches for long-, medium- and short-term storage and determine optimum technologies and storage periods.
Storage technologies and fruit treatment before storage
Fruit storage is the most important stage of the living system under consideration: a technological process for managing fruit life processes after harvest, restraining ripening and ageing, protecting against physiological and fungal diseases, and preserving initial quality as fully as possible over a long period.
Ethylene is the hormone of fruit ripening and ageing, so storage quality depends on accumulated ethylene levels. Effective inhibition of ethylene biosynthesis and prevention of its negative postharvest effects preserve fruit quality and extend storage life.
After harvest, the main factors for managing fruit life processes are temperature, relative humidity and atmospheric composition, including oxygen, carbon dioxide and ethylene.
The combined use of these factors enabled several apple storage technologies:
- normal atmosphere (NA) (O2=21%, CO2=0.03%);
- controlled atmosphere (CA) with ultra-low oxygen (O2=0.8–1.5%, CO2=0.8–3%);
- modified atmosphere (MA) (O2=12–18%, CO2=3–6%).
Several countries, including Italy, the Netherlands and Germany, have developed and use dynamic controlled atmosphere (DCA) storage.
Each of these technologies has advantages and disadvantages.
In the 2000s, the ethylene inhibitor 1-methylcyclopropene (1-MCP) was developed in the USA and Russia, becoming the main component of Smart Frech and Fitomag, respectively. Its molecules bind to ethylene receptors on the cell membrane, occupying ethylene’s place. Ethylene can therefore no longer bind and form active complexes. Because 1-MCP binds to receptors 10 times more strongly than ethylene, it effectively controls ethylene biosynthesis and preserves fruit quality both during storage and delivery to consumers, extending shelf life. Existing storage technologies thus achieve maximum effectiveness when combined with postharvest 1-MCP treatment.
The main storage losses arise from fruit diseases, including superficial scald, bitter pit, internal and external tissue browning, breakdown and fungal rots. Resistance depends on varietal genotype, preharvest and postharvest factors, storage technologies and duration, confirming the need to manage every stage of a single living system.
Many years of research led to the development of:
- indicators for optimum fruit harvest timing;
- indicators for forming uniform storage batches;
- differentiated conditions (t°C, O2, CO2) and apple storage periods accounting for the biological characteristics of varieties and each batch in NA, CA and MA;
- postharvest ethylene-inhibitor treatment technology according to pomological variety, including dose and treatment timing;
- indicators for predicting the keeping quality of uniform batches and their sale timing.
Storage systems require adaptation to each farm’s conditions, considering varietal composition, orchard type, existing storage facilities and staff qualifications. Introducing new technologies requires training and retraining specialists in fruit production, harvest, storage and sale.
The new technologies were tested over 12 years at large farms in the southern zone (OAO Sad-Gigant and others) and central zone (OAO 15 let Oktyabrya and OAO Agronom). Based on the accumulated experience, they are recommended for widespread implementation.
Differentiated use of the new technologies enables long-term fruit storage of 7–10 months, with minimal losses and high quality retained.
Fruit quality control during storage
Fruit physiology and quality are monitored during storage (Table 2). A sales plan is prepared from the indicators in Table 2.
Table 2. Monitoring fruit physiology and quality
Indicator |
Indicator value |
|
Exogenous ethylene content in rooms |
no more than 5 ppm |
|
Endogenous ethylene content in fruit |
less than 5 ppm |
|
Fruit firmness |
at least 6 kg/cm2 |
|
Conjugated triene content (for scald-susceptible varieties) |
no more than 5 nmol/cm2 |
|
Visual inspection of fruit in rooms and after exposure to room conditions for 7–10 days |
freshness, attractiveness, superficial scald, bitter pit, internal and external tissue browning, flavour and other factors. |
Packing and sale
Packing and sale is the process of forming batches with uniform market quality to establish optimum prices and sales markets.
At this stage, an important condition for preserving quality is using modern packing and container-handling lines that reduce mechanical damage losses and separate fruit into commercial grades according to size, colour and damage from different defects.
Fruit must be delivered to sales markets using specialised transport with temperature and relative humidity control.
Gudkovsky V.A., Head of the Postharvest Technologies Department at the I.V. Michurin Federal Scientific Centre, Doctor of Agricultural Sciences, Professor, Academician of the Russian Academy of Agricultural Sciences
